Lightweight Eps Cement Sandwich Wall Panel Of Sound Insulation

This product is used in the separate wall and partition wall of the building; it can also be used in the external wall and fire partition wall.
Chat Now

Product Details

Product origin

The light composite sandwich wall plate is made by using high-strength cement as a cementing material as a surface layer, and is made of alkali-resistant glass fiber mesh cloth and non-woven fabric, And a unique thermal insulation light wall board is constructed.


Product parameter


Feature and Advantage



The light wall board is more than ten times lighter than the clay solid brick, is more than 100kg lighter than the hollow block, and handles the questions of the girder, the big column and the deep root bottom, and the connection of the plate column has outstanding anti-seismic function

Sound insulation、

Water proof

The closed micropore structure in the plate is useful to isolate the sound transmission and sound absorption function, sound insulation ≥ 40dB, waterproof, moisture proof, freeze-thaw resistance are up to the standard.
Fast ConstructionDry work, simple and convenient device, more than 6 times faster than block wall, can greatly shorten the construction period. 


Wallboard data do not contain toxic, harmful substances, and waste energy saving belongs to the national development of green goods.

Strong Hanging Force

By hanging test,the single point hanging force of wall panel can be up to 50kg and above level,and fully meet the wall of the general bearing applications,such as the installation of air-conditioning,condole ark,water heater,fixed,marble mesa skeleton support and so on.
Lightweight、Optimize structuresThe flexibility to optimize the beam-column structure,improve economic efficiency,improving the room reasonable layout.Without the limitation of beam-column,the sandwich panel could be arbitrarily grooved and easy installated.
Space saving increase living space
Red brick for four bedrooms,two living rooms,one kitchen and one bathroom 196m2;ZJT panel for four bedrooms,two living rooms,one kitchen and one bathroom 205m2;ZJT panels save 9m2.

Product applications

1).Interior partition (60mm,75mm or 90mm is your best choice)

2).Exterior Wall (100mm,120mmor 150mm)

3).Floor and roof

4).prefabricated houses

5).Modern high-rise Building

6).Schools, Hotels, office

7).Indoor space of ecological residences

8).All kinds of houses and structures


Manufactueing Process

Alignment:making the base line of the installation position of the wallboard.


Sawing of wallboard:cutting and adjusting the width and length of wallboard on the basis of the requirement.


Sizing: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.


Fitting the sheet: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.


Placing the wallboard: filling the vacant position of the wall 


Adjustment: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.


Filling joints: clear away the facial panel  cement mortar and press it tightly with round steel bar.


Installation of crack-resistant material: after about one week, taking out the wooden wedges and paste the anti-crack tape with cement mortar.


Insertion of wires: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.


Plastering paint: to finish the wal, tiles can be paste without any scraping and wallpaper also can be applied directly.




Xiamen ZhongJingtai Building Materials Co.,Ltd 

 Remarks : Any further information please feel free to contact me 

Contact Person:Jodie Huang

Tel: +86-592-5216902


Hot Tags: lightweight eps cement sandwich wall panel of sound insulation, suppliers, manufacturers, factory, price


You Might Also Like