EPS Sandwish Panel

EPS cement sandwich board is a kind of light weight energy-saving wall material, which is made of cement calcium silicate or reinforced calcium silicate board as the panel, filled with cement and foaming polystyrene (EPS) foam particles, and used as the core material after a composite. It can be...
Chat Now

Product Details

EPS cement sandwich board is a kind of light weight energy-saving wall material, which is made of cement calcium silicate or reinforced calcium silicate board as the panel, filled with cement and foaming polystyrene (EPS) foam particles, and used as the core material after a composite.  It can be widely used in all kinds of high and low building wall materials, such as hotel, apartment, towers, shopping malls, Banks, office buildings, hospitals, schools, villas, old house, rebuild home workshop for EPS cement sandwich wall panel/fire EPS cement sandwich board roof adopt plastic filling, wedge, tray is good of our products have passed SGS TUV certification   

 produce process

Specification

 



National StandardsTesting Results
S/NItems60mm90mm120mm60mm90mm120mm
1

Anti-impact 

Capacity/times

≥5

≥5

≥5

≥8

≥10

≥15

2Anti-bending damage load/times over deadweight

≥1.5

≥1.5

≥1.5

≥3

≥4

≥5

3Anti-pressure(Mpa) 

≥3.5

≥3.5

≥3.5

≥5

≥5

≥5

4single point hanging strength ≥1000

≥1000

≥1000

≥1200

≥1300

≥1500

5Sound insulation capacity in the air (DB) ≥30

≥35

≥40

≥36

≥40

≥45

6Fireproof limit/h ≥1

≥1

≥1

≥4

≥4

≥4

7Heat transfer coefficient(B/W/M^2.K) //

≤1.0

≤0.1478

≤0.1478≤0.1478

 

Packaging & Shipping

Packing 
Free packing: normal pallet + packing belt
Standard exporting packing: good pallet+corner protective paper+packing belt+plastic thin film
Loading: Normally 18 pallets per 20' container or according to clients' requirements


 


 

Installation and Accessory Materials

Alignment:making the base line of the installation position of the wallboard.
       
Sawing of wallboard:cutting and adjusting the width and length of wallboard on the basis of the requirement.
       
Sizing: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.
       
Fitting the sheet: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.
       
Placing the wallboard: filling the vacant position of the wall 
       
Adjustment: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.
       ↓ 
Filling joints: clear away the facial panel  cement mortar and press it tightly with round steel bar.
       
Installation of crack-resistant material: after about one week, taking out the wooden wedges and paste the anti-crack tape with cement mortar.
       
Insertion of wires: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.
       
Plastering paint: to finish the wal, tiles can be paste without any scraping and wallpaper also can be applied directly.

 

 process2

Accessory Materials

 

Steel Bar 

Anti-crack Tape

Wooden Wedge

Cement Mortar

Electrick Circular Machine

 

Company Information

XIAMEN ZHONGJINGTAI BUILDING MATERIALS CO., LTD. is a professional high-tech research and development company producing new wall materials, machinery and equipment development,

technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport.

Xiamen ZhongJingtai Building Materials Co., Ltd, a professional high-tech research and development company specializes in producing new energy-saving wall materials---Foam Core Sandwich Panels, machinery and equipment development, technology production and promotion of product applications. We focus on persuing to the environmental and energy-saving modern wall materials and also positively respond to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. In addition, We can produce more than 2 million square meters of various wall materials annually. Quality first, honesty and  win-win cooperation are our management ideas.

Certificates

We have received ISO9001:2008 quality management system, ISO ISO14001:2004(GB/T24001-2004) environmental management system, OHSAS 18001:2007(GB/T24001-2001) occupation health and safety management system certification and China Environmental labeling (CEC).



 Feature: Interior/Exterior Sandwich Panel Fast construction 75-80m2/day three workman Sound insulation 46dB Space saving Save 4.26m2 per 100 m2 area Anti-seismic Class 7-8 Fireproof 4 hours, under 1000 degree centigrade Eco-friendly 100% non-asbestos Hanging force Single point hanging force 50kg, Embed hanging force 150kg Service Life 60-70years


We have established the business with many foreign countries around the world,such as Jordan,Qatar,Australia,Canada,Malaysis,Aman.

 

Our clients are spokesmen of our product!

 

 

1 


Contact Information

Abby
Mobile Phone: 0086-592-5216902

Whatsapp:+8613298154371
 Website: http://www.sandwich-wall-panel.com
Company Address: Xiamen ZhongJingTai Building Materials CO., Ltd.
   


Inquiry