ZJT Lightweight Composite Energy-saving Wall Panel is composed of face panel and interior filling.The material of face panel is thin fiber cement board or calcium silicate board,and the middle is filled with lightweight composite core materials,including cement,EPS and fly ash.
The product has the advantage of Solid , Lightweight, Thin, Better Strength, Impact Resistance, Hanging Strength, Heat Insulation, Sound Insulation, Fireproof, Waterproof, Easy Cutting, Pet and Rot Resistant, Increasing Usable Space.It can be arbitrarily slotted, without batch file,dry operation, environmental protection, which achieve energy conservation and energy efficiency.At the same time,it reduces the total area to be occupied by the wall and to raise residential practical area,alleviates the structure load,improves the building aseismatic capacity and safety performance, and reduce total cost. This production technology and application are the reform of the wall material, and a new breakthrough in our country.
This not only conforms to modern construction requirement but also meets the country environmental-friendly building policy.
1)Highlight the economic benefits reduce project cost
ZJT sandwich panel could potimize beam structures,adjust building layout and improve application performance. It has following economic advantages: save living space, fast construction, low labour cost and 70% of panel could be recyled.
2)Lightweight Optimize Structures
ZJT lightweight energy-saving sandwich panel, the weight for thichness 75mm is about 60kg/m2, the average weight fot the panel is 60-80kg/m3, while the bricks is 360kg/m2,the Autoclaved Aerated Concrete is 120kg/m2. Before the design, the flexibility to optimize the beam-column structure, improve economic efficiency,improving the room reasonable layout. Without the limitation of beam-column, the sandwich panel could be arbitrarily grooved and easy installated.
3)Space saving increase living space
ZJT lightweight sandwich panels have sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels, the sound effects in the line with national residential sound requirements, much higher than other excuses brick wall of sound effects.
5)Easy to construct, transport and time saving
6)Earthquake resistance and impact resistance
Under the condition of the same magnitude, if using ZJT wall panel would greatly reduce the wall damage rate.
7)Strong hanging force, can be slotted wiring and buride pipe
The single point hanging force of wall panel can be up to 50kg and above level, and fully meet the wall of the general bearing applications, such as the installation of air-conditioning, condole ark,water heater, fixed, marble mesa skeleton support and so on.
1: Your inquiry related to our products will be replied in 24 hours.
2: Well trained and experiences staffs to answer all your enquiries in fluent English.
3: Any your customized items we can help you to design and put into production.
4: Protection of your sales area, ideas of design and all your private information.
Xiamen ZhongJingtai Building Materials Co.,Ltd
Address: Unit 2A, Lianchang Building, No.6-8 Huli Avenue, Huli District, Xiamen, China
Cellphone: +86-592-5216902 Fax: 86-592-5216319