New Building Construction Materials Manufactured Home Wall Panels

The light wall board is light in texture and easy to install. Environmental protection is beautiful, heat insulation and sound insulation. It can increase the use area of the room. It is an environmental protection material and has the support of the state. Light partition can be cut at will, which brings great convenience and flexibility to the construction. And the variety of light partition board, strong selectivity, but also improve the grade of decoration, looks both beautiful and generous.
Chat Now

Product Details

New building construction materials manufactured home wall panels




ZJT EPS cement sandwich panel is a kind of light weight energy saving wall material taking reinforced fiber cement board as face panel, within cement, EPS, fly ash as core material and forming by one time compound.Its birth marks the wall material will appear renewal trend, instead of traditional block, the new architectural thoughts and its outstanding performance meet the requirements of modern architectural environment.

Light-Weight-High-Rate-Fireproof-Cement-EPS-Sandwich-Wall-Panel.webp_wps图片Specification and Parameter 








1. Energy saving, environmental protection, no harmful substances, no radioactivity, can be reused, do not produce construction waste, widely used in all kinds of places.


2. The fire resistance limit of fire prevention at 1000 degrees Celsius is more than 4 hours, and it does not emit toxic gases, and its non-flammability meets the national class A standard.


3. Compared with the traditional masonry wall thickness, the building space is greatly saved by increasing the thickness of the wall material between 60-180mm and the traditional masonry wall thickness.


4. Moisture-proof waterproof in containers made of no waterproof veneer without any leakage of water, with good waterproof, moisture-proof performance, suitable for factory buildings, bathrooms, basements and other wet areas.


5. Compression, seismic, impact resistance because of the assembly construction, itself is a three-in-one structure, the plate and tenon are connected as a whole, compressive seismic, impact resistance are up to the national standard.



6. The heat-insulating and heat-insulating wall material mainly uses the environment-friendly energy-saving material which is cold-resistant and heat-insulating, has a good heat-insulating and heat-insulating function, and the indoor temperature is kept at a constant level, so that the environment is more comfortable.


7. The hanging and pasting wall board can be used for hanging heavy objects directly or on the upper expansion bolt, the single-point hanging force is above 50kg, the surface of the panel of the wall board is smooth and smooth, and the dust can not be generated, and the materials such as the ceramic tile, the wall paper and the wood decorative plate can be directly adhered and processed.







1) • Interior wall, Partition wall & exterior wall:

 It has been widely applied to interior partition of high-rise buildings, with the advantages of excellent fire-proof, best hanging force and easy installation.


Interior/erterior wall


Partition wall

2) Floor System:

 It's much suitable for the floor plate of factory, workshop, warehouse, etc.



Packing and Shipping


1). Free packing, normal pallet + packing belt

2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film

3). Loading: Normally 18 pallets per 20' container or according to clients' requirements.





1. Is EPS cement sandwich panel lightweight? 

Yes, it is. Capacity six hundred and fifty to eight hundred KG per cubic meter, it is one sixth of brick wall, even is one half of aerated concrete block. 


2. Is EPS cement panel fireproof? 

Yes, it is. It control fire slipping out of the origin unit, prevent fire spreading, prevent toxic gas generating or insolating Through fire high temperature test for four hours, panels only have skin injury


3. Is EPS cement panel thermal insulation? 

Yes, it is. EPS cement panel's composite material determines that it has excellent heat insulation and thermal insulation functions


4. Is EPS cement panel soundproof? 

Yes, it is. EPS cement panel's surface is fiber cement board, interior composite material and the concave-convex grooves between two panels make it has excellent sound absorption and soundproof function. 100mm thickness isolate sound beyond 45dB, it's much higher than blockwork


5. Is EPS cement panel strength strong? 

Yes, it is. Anti-impact performance is 1.5 times of the blockwork, With steel structure fixed, can make high levels, big span wall, overall anti-seismic performance is 10 times of normal blockwork


6. After installation can it be paint without putty? 

Yes, it can. You can paint directly without putty, and also can decorate without plastering



Contact us

Xiamen Zhongjingtai Building Materials Co., Ltd 

Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China

Contact person:Jodie Huang  

TEL: +86-592-5216902    FAX: +86-592-5216319    

Mobile/Whatsapp/Wechat: +86-13695041249 

Email:   Website:  


Hot Tags: new building construction materials manufactured home wall panels, suppliers, manufacturers, factory, price


You Might Also Like