Asbestos sandwich panel exterior concrete prefab house wall panel
Core material:EPS,Cement,Additives,Fla Ash
Face material:5mm Calcium Silicate Boards
|EPS Wall Panel||Length*Width (mm)||Thickness optional (mm)|
Interior wall/Exterior wall
Roof and Floor
Other Widely Used
It is scientifically maintained through high-tech technology and has a high degree of mechanization. Unlike bricks, which are burnt at high temperatures, a large amount of exhaust fumes are burned. Therefore, the lightweight partition board is very environmentally friendly in terms of production, and has little impact on the environment and the atmosphere. And its raw materials are not harmful to the human body.
The lightweight partition board is very resistant to high temperatures. It can be held for several hours under high temperature combustion without damage, and the combustion will not release harmful gases.
3. Sound insulation.
Due to the addition of soundproofing materials during production, its sound insulation is very good and much stronger than ordinary bricks.
4. Light economy.
Because it is mechanized, its finished product is relatively low. It is light in weight and easy to handle.
5. moisture-proof, waterproof and corrosion-resistant.
Its water absorption is not as good as bricks, so don't worry that it will absorb the moisture in the air and make the air dry. It has a hard texture and very good anti-corrosion effect.
Light weight composite sandwich wall panels installation process:
1.Put wire,transport board in place,popup or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with “7shaped”ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate
Simple installation process:
1.Put wire 2.Cutting 3.Put cement binder 4.Put cement binder
5.Adjustment 6.Installation 7.Correction 8.Fill the pulp 9.Fixed
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang
TEL: +86-592-5216902 FAX: +86-592-5216319
Email: firstname.lastname@example.org Website: www.zhongjingtai.com