EPS cement sandwich wall panels
ZJT Lightweight Composite Energy-saving Sandwich Wall Panel is composed of face panel and interior filling. The material of face panel is thin fiber cement board or calcium silicate board, and the middle is filled with lightweight composite core materials, including cement, EPS and fly ash. And our panel has the advantage of solid,lightweight, thin, better strenth, Heat Insulation, Sound Insulation,Fireproof, Waterproof, Easy Cutting, Pet and Rot Resistant, Increasing Usable Space.
Face Materials: Calcium Silicate Board
Core Materials:Cement, EPS, Fly Ash.etc
ZJT sandwich wall panel could optimize beam structure, adjust building layout and improve application performance. It has following economic advantages: save livin space, fast construction, low labour cost and 70% of panel could be recyled.
lightweight energy-saving sandwich panel, the weight for thickness 75mm is about 60kg/m2, The average weight for the panel is 60-800kg/m3, while the bricks is 360kg/m2, the Autoclaved Aerated Conrete is 120kg/m2. Before the design, the flexibility to optimize the beam-column structure, improve economic efficiency, improving the room reasonable layoout. Without the limitation of beam-column, the sandwich wall panel could be arbitrarily grooved and easy installated.
Our panel have good sound insulation, it is 40dB for 90mm thick wann and much better for thicker panels, the sound effects in the line with national residential sound requirements, much higher than other excuses brick wall of sound effects.
ZJT panel has many advantages which light weight, compressive strength, strong impact resistance that other materials do not have in the construction of the operation personnel is required extremely low and master coolie all can do. Compared with traditional clay brick construction, the efficiency can be promoted about 10 times, without plaster processing, greatly save the time for a project. According to many groups construction sites data, brick masonry construction capacity of 12 individuals for eight hours a day, if use ZJT wall panel in construction, three people could complete in 60 minutes, so efficiency advantage is very significant.
ZJT building materials the high strenth and high hardness feature make its good performance in trems of shock. ZJT in full impact vibration system that triad structure, prefabricated construction , super thick groove yin-yang design, the reinforced steel make wall panels base closely and firm connection, also can resist 8 intensity earthquake, whose seismic performance is 1.5 times that of the traditional wall materials, and non-deformation, integral sex is good, metope is not loose etc.
By hanging test, the single point hanging force of our wall panel general bearing applications, such as the installation of air-conditoning, condole ark, water heater, fixed marble mesa skeleton support and so on. In building wall applications, common wire and cable need through the grooving buried in wall, and routers, switches, sockets, power controller need the excavate hole in the wall, ZJT wall panel can meet the above all demand and can easily slot hole on wall panel, also can reduce dust and increase the operation environment quality
ZJT lightweight energy-saving composite wall panel not only can be applied to wall materials, but also make it unique in floor application for the outstanding performance such as the high bearing, high strenth, light weight, construction fast, slotted wiring and so on. It is especially suitable for factory, workshop, warehouse, store, temporary buildin floors, etc. When used as a floor and roof, it can be used with steel structure and the stability is very outstanding.
our panel can be widely used in the partition of highrise buildings, industrial plants, office buildings,
residential houses, hotelwork shed and other constructions. It can be also used as non load bearing structure of washroom, kitchen and renovation of old houses. And it's particularly applicable to places with high fireresistance requirement.
ZJT wall panel has the cahracteristics of sound insulation, heat insulation warm-keeping are preventing condensation water. Its ability of moisturizing can matain moisture in the air at a constant state and ecological regulation. It accords with the new building trend. IT can be widely applied to various occason,such as low-rise building, duolex appartments, villas, hotels, office buildings, commercial spaces and urban houses. ZJT wall panel as a non-bearing wall panel, which can be installed with steel leel, bearing part can be kept in steel frame and beam column.
With excellent fireproof, best hanging force , sound insulation, waterproof, fast installation, our panel also have been applied to interior and exterior walls.
1. Free packing (with normal pallet and packing belt) 2. Standard exporting packing (wrapped with plastic thin film, wedge protect and good pallet)
2.Delivery Detail:10-15 days
Cellphone: +86-592-5216902 Fax: 86-592-5216319
Address: Unit 2A, Lianchang Building, No.6-8 Huli Avenue, Huli District, Xiamen, China