EPS Cement Sandwich Panel is a kind of lightweight energy saving wall material, which uses cement calcium silicate or reinforced calcium silicate board as face panel, filled with cement, Expanded Polystyrene (EPS) foam particles, and as core material and forming by one time compound.
The product has the advantage of Solid , Lightweight, Thin, Better Strength, Impact Resistance, Hanging Strength, Heat Insulation, Sound Insulation, Fireproof, Waterproof, Easy Cutting, Pet and Rot Resistant, Increasing Usable Space.It can be arbitrarily slotted, without batch file,dry operation, environmental protection, which achieve energy conservation and energy efficiency.At the same time,it reduces the total area to be occupied by the wall and to raise residential practical area,alleviates the structure load,improves the building aseismatic capacity and safety performance, and reduce total cost. This production technology and application are the reform of the wall material, and a new breakthrough in our country.
Non-load bearing interior & exterior wall panels, partition wall panels, floor panels, roof panels.
Bathrooms, kitchens, garages, basements, prefabricated houses, family homes, dormitories, residences, apartments, luxurious villas, factory warehouses, production workshops, auxiliary plants, hotels, bars, shopping malls, restaurants, schools, hospitals, airports, etc.
Green and environment-friendly, non-harmful substance, no radiation, reusable, no construction waste, widely used in various places.
The non-inflammability of the Ojunda board can be reached national A level standard. Under the high temperature of 1000 degrees, the fireproof feature can last four hours, do not radiate toxic gasses.
Increased the usable area
The thickness of the board is between 50mm-200mm. It largely saves the construction space compared with the traditional block.
Anti-pressure, anti-quake and anti-impact
Because of fabricated construction, 3-in-1 structure and using tongue and groove to join panels, the anti-pressure, anti-quake and anti-impact all meet the national standard.
Waterproof and wetproof
The water container is made of Ojunda material without any waterproof plaster with no leakage at all. The tests show that the material has good waterproofness and dampproof. Ojunda material can be used in the wet area such as kitchen, toilet, and basement.
Good sound insulation, sound absorption and noise reduction functions. For example, the amount of sound insulation is up to 40dB with the 90mm thickness of the wall board, which is 2 or 3 times than the traditional wall.
Simple construction, high efficiency
The wall material is completely dry work, fabricated construction. The materials can be arbitrary cut according to specification. During the construction of transportation concise, pile up, no need of mortal health file, greatly reduction the time duration, and the calibration material, reducing the low construction waste. Easily transported, clearly stack and no mortar batch file largely shorten the construction period. Besides, the construction waste can be reduced by the lowly loss rate.
Wall materials mainly are made from environmental protection and energy saving heat insulation material. With a good heat insulation and preservation function, it can keep the indoor temperature at a stable range and make the environment much more comfortable.
Spiking and stickability
The wall material board can be nailed directly or install expansion bolt to hang heavy loads. The single point of hanging strength is above 45kg. The surface of the board can be covered by ceramic tile, wall paper, wood panel and other materials due to the smooth and ash-free features.
Lightweight and economy
The core material of wall board is filled with lightweight EPS. The volume-weight is about 600–800 kg/m3. Freely plastering and the weight is only 1/6 of the traditional wall.
Reusable and user-friendly
The wall board can be reused in the movable interior wall such as supermarket, office, etc. The lightweight energy-saving wall board can be reusable. Dismounting and installation are simple and improved usage rate and economy saving. Also it has no construction waste and no affect other people’s normal work.
1: Your inquiry related to our products will be replied in 24 hours.
2: Well trained and experiences staffs to answer all your enquiries in fluent English.
3: Any your customized items we can help you to design and put into production.
4: Protection of your sales area, ideas of design and all your private information.
Xiamen ZhongJingtai Building Materials Co.,Ltd
Address: Unit 2A, Lianchang Building, No.6-8 Huli Avenue, Huli District, Xiamen, China
Cellphone: +86-592-5216902 Fax: 86-592-5216319