Siding Panels Exterior Wall Concrete Prefab Houses Kit Insulated Wall Panel

This product has many advantages, the most notable of which are fire and sound insulation. 1. This product is the most ideal fire-resistant inner partition wall at home and abroad, with a fire resistance limit of 3 hours, and does not emit toxic gases, which conforms to national building material industry standards. 2. It has a good sound insulation effect, reaching 42dB, which meets the sound insulation requirements of national houses, which is much higher than the sound insulation requirements of other masonry bricks.
Chat Now

Product Details

Siding Panels Exterior Wall Concrete Prefab houses kit Insulated Wall Panel

Product introduction of  siding panels exterior wall

The composite wallboard is mainly made of special cement as gel raw material and mechanical pressing after adding a large amount of fly ash. The composite wallboard is different from the traditional building material, it has the advantages of environmental protection, small pollution, light weight, heat preservation and sound insulation, etc. The plate made can be assembled at will, and it is a kind of multifunctional wall material.

原材料3

Product features of  panel sandwich

1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.

2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.

3.Lightweight,optimize structures.
 A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
 B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.

 C.The wall can not be restricted by beam and column.

4.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

5.Waterproof.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.

6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.

Product specification of  pir sandwich panel

Brand nameLightweight Composite EPS Cement Sandwich Wall Panel
Length*Width(mm)2270/2440*610
Thickness(mm)607590100120150
Application(mm)RoofInterior wallExterior wall or floor



Product application of insulated wall panel

It can be used as both interior and exterior partition walls or all kinds of decoration and building construction, and also the best materials for plants, apartments, hotels, office buildings and public constructions, etc. 
In addition, they are used for compartments, households, bathrooms, the interior partition walls of kitchens.

12

11

屋顶地板应用

应用大全3


Product pack and ship of prefabricated house prices  

1.Free packing (with normal pallet and packing belt)
 2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container

3.

About  us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture.

1

工厂2
Certificate of insulated interior wall panel  


1


资格证书3


Contact us

Fuma_MimePart_5

Xiamen Zhongjingtai Building Materials Co., Ltd 
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang  
TEL: +86-592-5216902    FAX: +86-592-5216319    
Mobile/Whatsapp/Wechat: +86-13695041249 
Email: sales07@zhongjingtai.com   Website: www.zhongjingtai.com  


Hot Tags: siding panels exterior wall concrete prefab houses kit insulated wall panel, suppliers, manufacturers, factory, price

Inquiry

You Might Also Like