Prefab Wall Panel Insulated Wall Panel Interior Soundproof Wall Panels Sandwich Roof Panel

Thermal insulation, fire prevention, and sound insulation are part of the nine strengths of lightweight composite wall panels. Due to the complexity of KTV construction, the fire protection function must be in place. The performance of lightweight composite wall panels meets national A-level standards. Good sound insulation effect is sought after by many KTV businesses. Compared with the practical area of masonry, the application of composite wall panels per 9m² can increase by about 0.82m² per room, and the economic benefits are very obvious.
Chat Now

Product Details

Prefab wall panel insulated wall panel interior soundproof wall panels sandwich roof panel

Product introduce

The fiber-reinforced silicate plate is used as the panel, the middle is filled with light core material, and the non-load-bearing lightweight composite wall material is compounded and formed. It is environmentally friendly, light and high-strength, heat-insulating and sound-proof, waterproof and convenient for construction. Performance: green, 100% non-asbestos, no radioactive materials; solid, lightweight, thin body, high strength, impact resistance, strong hanging force; heat insulation, sound insulation, waterproof.
1

Product specification
 

Product nameLighweight eps cement sandwich panel
Length*Width(mm)2270/2440*610
Thickness(mm)607590100120150
Applicationroof interior wallexterior wall or floor slab


Product feature

1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.

2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.

3.Lightweight,optimize structures.
 A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
 B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.

 C.The wall can not be restricted by beam and column.

4.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

5.Waterproof.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.

6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.


Product application

Application

1).Interior partition (60mm,75mm or 90mm is your best choice)
2).Exterior Wall (100mm,120mmor 150mm)
3).Floor and roof
4).prefabricated houses
5).Modern high-rise Building
6).Schools, Hotels, office
7).Indoor space of ecological residences
8).All kinds of houses and structures
11

3


Packing and shipping

1.Free packing (with normal pallet and packing belt) 2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container.

Certificate

3


About us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. 
Certificate:SGS,TUV
Major Exported Countries:Middle Eat,Southeast Asia,Europe,South America
image_wps

1

Contact us

Fuma_MimePart_5XIAMEN ZHONGJINGTAI BUILDING MATERIALS CO. LTD.
AREA B-1.UNIT 403,NO.168 TAPU EAST ROAD,SIMING DISTRICT,XIAMEN,CHINA
Contact person:Jodie Huang  
TEL: +86-592-5216902    FAX: +86-592-5216319    
Mobile/Whatsapp/Wechat: +86-13695041249 
Email: sales07@zhongjingtai.com   Website: www.zhongjingtai.com  


Hot Tags: prefab wall panel insulated wall panel interior soundproof wall panels sandwich roof panel, suppliers, manufacturers, factory, price

Inquiry

You Might Also Like