Ployurethane insulated lightweight partition wall panel foam concrete house
Characteristic of panel
The calcium silicate board polyphenyl particle composite sandwich wallboard is a novel high-grade light wall board material prepared by taking the polyphenyl particle mortar as a core material, taking the calcium silicate board as a surface layer material, and appropriately mixing the fly ash, the slag and the admixture. The size of the product is:length2440/2270mm,width610mm,thickness60/75/90/100/120/150/180mm（self-regulation）. The two surface layers of the novel composite sandwich board are made of high-strength water-resistant calcium silicate plates, and the waterproof performance is good; and the core material is a polyphenyl particle bonding mortar, and the thermal insulation performance is good; and the product integrates the heat insulation, the structural function and the waterproof property, and is mainly used for wall partition of the building.
Advantages of wall panel
1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.
2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.
A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.
C.The wall can not be restricted by beam and column.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.
6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.
7.Strong hanging force,can be slotted wiring and buried pipe.
By hanging test,the single point hanging force of wall panel can be up to 50kg and above level,and fully meet the wall of the general bearing applications,such as the installation of air- conditioning,condole ark,water heater,fixed,marble mesa skeleton support and so on .
If you want to know about other performance, please contact me
Applications of wall panel
1) • Interior wall, Partition wall & exterior wall:
It has been widely applied to interior partition of high-rise buildings, with the advantages of excellent fire-proof, best hanging force and easy installation.
2) Floor System:
It's much suitable for the floor plate of factory, workshop, warehouse, etc.
Specification of wall panel
Certificate of wall panel
1. Is EPS cement sandwich panel lightweight?
Yes, it is. Capacity six hundred and fifty to eight hundred KG per cubic meter, it is one sixth of brick wall, even is one half of aerated concrete block.
2. Is EPS cement panel fireproof?
Yes, it is. It control fire slipping out of the origin unit, prevent fire spreading, prevent toxic gas generating or insolating Through fire high temperature test for four hours, panels only have skin injury
3. Is EPS cement panel thermal insulation?
Yes, it is. EPS cement panel's composite material determines that it has excellent heat insulation and thermal insulation functions
4. Is EPS cement panel soundproof?
Yes, it is. EPS cement panel's surface is fiber cement board, interior composite material and the concave-convex grooves between two panels make it has excellent sound absorption and soundproof function. 100mm thickness isolate sound beyond 45dB, it's much higher than blockwork
5. Is EPS cement panel strength strong?
Yes, it is. Anti-impact performance is 1.5 times of the blockwork, With steel structure fixed, can make high levels, big span wall, overall anti-seismic performance is 10 times of normal blockwork
6. After installation can it be paint without putty?
Yes, it can. You can paint directly without putty, and also can decorate without plastering
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang
TEL: +86-592-5216902 FAX: +86-592-5216319
Email: email@example.com Website: www.zhongjingtai.com