Outdoor Wall Panels Insulated Metal Panels Polyurethane Sandwich Panel Insulated Interior Wall Panel

The light composite sandwich wall plate is made by using high-strength cement as a cementing material as a surface layer, and is made of alkali-resistant glass fiber mesh cloth and non-woven fabric, And a unique thermal insulation light wall board is constructed.
Chat Now

Product Details

Outdoor wall panels  insulated metal panels polyurethane sandwich panel insulated interior wall panel  

Product introduce

The composite wallboard is mainly made of special cement as gel raw material and mechanical pressing after adding a large amount of fly ash. The composite wallboard is different from the traditional building material, it has the advantages of environmental protection, small pollution, light weight, heat preservation and sound insulation, etc. The plate made can be assembled at will, and it is a kind of multifunctional wall material.

原材料3

Product specification

Product nameLightweight eps cement sandwich wall panel
Length*Width(mm)2270/2440*610
Thickness(mm)607590100120150
Applicationroofinterior wall exterior wall and floor


Product feature

1.Hightweight the economic benefits,reduce project cost.
The light energy-saving composite wall plate is made of industrial residue fly ash, calcium silicate panel, ceramsite, silicate cement and EPS foam particles as main raw materials, the production process is simple, the cost is low, and the economic benefit is considerable.

2.Advanced technology level.
The industrialization of housing construction in this century has become irreversible. According to the analysis of the development of wall materials in developed countries, the product is in accordance with the development law, which overcomes the defects of other light wall panels and has unique performance, and will be the leader of the new wall material.

3.Lightweight,optimize structures.
 A.Traditional brick block, the wall must be located in the vertical position on the beam to adopt.
 B.Zhongjingtai wall material, which can widen the distance between beams and columns, highlight the economic benefit of mining Jingtai wall material.

 C.The wall can not be restricted by beam and column.

4.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

5.Waterproof.
The light partition board can be filled with cement to form a pool body without making any waterproof decoration. The back of the light partition panel can persist in dryness, leave no trace, and will not show condensed water droplets in a humid climate. Light partition panel is a professional waterproof board, with good waterproof, moisture-proof performance, can be applied to kitchen, cleaning room, basement and other wet areas.

6.Easy to construct,transport and tim esaving.
Brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant


Product application

11

12

屋顶地板应用

应用大全3
Accessories

Specific mortar
0A4A0006

0A4A0006


The anti-crack mortar is mainly made from 42.5 portland cement mixed with anti-crack materials and additivies by the pre-dry mixing techniques.Plastering on each side of tenon side of panel,to connect panel and panel,panel and structure.

Electric saw
2(4)

Cutting Panels.

Steel bar
3(1)

Knocking into the wall panels by 45 degree to fix the wall panels.

Anti- Crack Tape
4(1)

Paste in gaps between two panels to avoid cracking.

Wall board fixing card slot

initpintu_副本



Certificate
资格证书3

About us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. 
Certificate:SGS,TUV
Major Exported Countries:Middle Eat,Southeast Asia,Europe,South America

Philippines exhibition in September,2019
4

Panama exhibition in September,2019
8
Contact us

Fuma_MimePart_5Xiamen Zhongjingtai Building Materials Co., Ltd 
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang  
TEL: +86-592-5216902    FAX: +86-592-5216319    
Mobile/Whatsapp/Wechat: +86-13695041249 
Email: sales07@zhongjingtai.com   Website: www.zhongjingtai.com  


Hot Tags: outdoor wall panels insulated metal panels polyurethane sandwich panel insulated interior wall panel, suppliers, manufacturers, factory, price

Inquiry

You Might Also Like