Lightweight Partition Wall Panel
Core material:fly ash,EPS,cement,etc
Length:2270,2440mm
Thickness:60,75,90,100,120,150mm
Application:floor,roof,exterior/interior wall
Origin:FuJian,China(mainland)
Port:Xiamen
Technical Index
Item |
Parameter Index Specifications |
||||||
60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
||
1 |
Heat transfer coefficient(w/m².k) |
≤2.0 |
≤2.0 |
≤2.0 |
≤2.0 |
≤2.0 |
≤2.0 |
2 |
Inner radiation index |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
3 |
Outer radiation index |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
≤1 |
4 |
Frost resistance(shall show no visible cracks and surface without change) |
_ |
_ |
shall show no visible cracks and surface without change |
|||
5 |
The combustion properties(A1 or A2) |
_ |
_ |
A1 or A |
Advantages
1.Lightweight Partition Wall Panel is fireproof.Under high temperature of 1000 degree centigrade,the fireproofing limit is over 4 hours and does not emit toxic gas ,non-ignitable performance up to national standard of class A.
2.It is waterproof,no bead on wall panel surface in wet climate.The face of th epanel is made of the fiber reinforced cement board whose waterproof properties is good.So it has strong resistance in the humid environment.
3.Low maintenance,resistance to rot, moisture and crack.The tests data show that the partition wall panel in damp environment for five consecutive months, it will be moisture absorption,no loose,not returning,non-deformation and not falling of the strength etc.
4.High repetition rate.The recycled utilization ratio reaches to 73%--91%.If our partition wall panel splicing method put to use, wall panel reuse rate would up to 93% which can save 71%-95% of wall panel costs as for the constantly changing indoor partition,and what’s more can reduce the construction waste,improve economic benefit.
Application
Lightweight Partition Wall Panel is widely used as wall board .The exterior walls are flat and beautiful, which can be directly coated and decorated.The interior walls of panel house are plat and can be applied putty and coated rapidly.What’s more, it can be used in floor application for the outstanding performance. It is widely used in all kinds of special-shaped building.And Lightweight Partition Wall Panel has advantage of dry used,easy installation,easy cutting which is suitable for pipe wells,fire wells etc.
FAQ
1.What’s your drying shrinkage value?
Under 0.5mm/m
2.What’s the heat transfer coefficient?
Below 2.
3.How about the frost resistance?
The Lightweight Partition Wall Panel shall show no visible cracks.
4.Can i get the sample?
Yes, we can offer you free sample if you need.