Lightweight EPS Composite Exterior Interior Panel
Face: Calcium Silicate Board
Core materials: Cement+EPS Polystyrene Foam+Sand
|Item||Parameter Index Specifications|
|2||Anti-bending damage load/times over deadweight||≥3.0||≥3.0||≥3.0||≥3.0||≥5.0||≥5.0|
|7||Dring shrinkage value(mm/m)||≤0.5||≤0.5||≤0.5||≤0.5||≤0.5||≤0.5|
|9||Sound insulation capacity in the air(dB)||≥35||≥35||≥40||≥40||≥45||≥50|
|11||Heat transfer coefficient(w/m².k)||≤2.0||≤2.0||≤2.0||≤2.0||≤2.0||≤2.0|
|12||Inner radiation index||≤1||≤1||≤1||≤1||≤1||≤1|
|13||Outer radiation index||≤1||≤1||≤1||≤1||≤1||≤1|
|14||Frost resistance(shall show no visible cracks and surface without change)||_||_||shall show no visible cracks and surface without change|
|15||The combustion properties(A1 or A2)||_||_||A1 or A2|
The materials and properties of ZJT Sandwich Panels make it possible that the panel can be applied on various of palce, such as floor, exterial wall, interial wall, patition wall,roof and pipe/fire well/equipment partition.
ZJT light weight compound sandwich panel can be innovatively used as floor board.This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
2).Villa&Exterior Wall Application
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.
3).Interior Partition Application
Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction.Its easy construction time brings out its hight integrated performance.
5).Pipe/Fire Well/Equipment Partition Application
ZJT light weight energy-saving sandwich wall panel has features of lightweight, easy cutting, dry used,and easy installation.It is the most suitable wall panel for pipe well, air sharft, fire well, equipment partition and room partition wall.
Compared with the traditional building materials, ZJT light weight energy saving composite sandwich wall panel has more practical advantages when used in different kinds of buildings.
1).Heat Insulation and Preservation
The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which can adjust the indoor temperature at a constant range to achieve the effects of ecological adjustment.
2).Waterproof and Fireproof
The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials are the mixture of cement, sand, fly ash, etc.
3).Sound Insulation and Absorption
The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
4).Easy Construction and Time Saving
For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part.
5).High Intensity and Quake Proof
The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.
6).Space and Cost Saving
For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.
7).High Recycled Ultilization Ratio
The panel is solid and strong physical performance,anti-corrosion,high strength and low damage rate.If ZJT's dry splicing method was put to use ,wall panel reuse rate would up 93%which can save 71%~95% of wall panel cost.
8).Strong Hanging Force and can be Slotted
ZJT panel can meet various of demand, be easily slotted hole and also will reduce dust and increase the operation environment quality.
Free packing, normal pallet + packing belt
Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
Loading: Normally 18 pallets per 20' container or according to clients' requirements
Installation of the Panel
Alignment→transportation of material →Sawing of wallboard→sizing→fitting the sheetplacing the wallboard→adjustment→filling joints→installation of crack-resistant materia→insertion of wires→platering paint.
Facing Processing of the Panel
2. Tile Fixing
3. Paste Paper or Wall Cloth
4. Paste Facing Board
5. Paste Marble
1. What is your mainly products?
Our mainly products are sandwich wall panel and color steel panel .
2. What is your delivery time?
One 20'GP container, about 10 working days
3. How about the samples?
The samples is free, but the delivery cost will be on your account, and we will deduct it after you place the order.
4. What is your time of making samples?
Usually we will take 1~3 days to make the sample.
5. What is your payment terms?
Normally we accept 30% T/T in advance,70% after shipment.
Or Irrevocable L/C
6. What is the shipping port?
Xiamen ZhongJingtai Building Materials Co.,Ltd
Address: Unit 2A, Lianchang Building, No.6-8 Huli Avenue, Huli District, Xiamen, China
Cellphone: +86-592-5216902 Fax: 86-592-5216319