Exterior Decorative Panel House Fire Rated Wall Panels

The application of cement lightweight composite sandwich wallboards has greatly improved the construction efficiency of construction projects, while reducing the labor costs of masonry structures, reducing dust generated during construction, and reducing the pressure on the environment caused by construction At the same time, cement lightweight composite sandwich wall panels make full use of industrial waste residues such as fly ash, reducing the pressure on land resources and air caused by traditional red bricks. Therefore, cement lightweight composite sandwich wallboard is an environmentally friendly building material.
Chat Now

Product Details

Exterior decorative panel house fire rated wall panels


Product introduce


Zhongjingtai Cement Lightweight Composite Sandwich Wallboard uses 5mm thick calcium silicate board as the panel, with polystyrene particles in the middle for foaming, sufficient foaming, uniform distribution, and good fire and high temperature resistance. This feature can ensure that the cement-based composite sandwich wall panel has good flame retardancy and fire resistance when used as an indoor and outdoor partition, and in the event of a fire, it is guaranteed that the wall does not burn, does not melt, and does not generate toxic gases. 


image

Hd4ff7921b07f40a58a2a5cd33f7d7c3dW_350x350.png


Product specification


Brand nameEPS lightweight composite cement sandwich panel
Length*Width(mm)2270/2440*610
Thickness(mm)607590100120150
ApplicationRoofInterior wallExterior wall or floor


Product features


1.Energy saving, Green, Environmental friendly 

The raw materials do not include harmful substances. 

Energy-saving effects of the building is greatly improved It is highly recommended by the government.


2. Durable

70+ years building life span.


3. Strong 

Hard surface and no damage after impacting. The hanging strength of single spot is 100kg, can nail  and affix tile.


4. Fireproof 

Panels have a fire rating of 4 hours. Grade A of National standard.


5. Waterproof, Dampproof

No bead on wall panel surface in wet climate.


6. Sound insulation 

The sound insulation capacity in the air is 35db-45db (according to National standard: GBJ121-88).


7. Quakeproof   

More suitable for seismic & cyclone prone zones.


8. Unique tongue and groove 

Specially designed tongue and groove arrangement ensures a perfect joint and makes construction faster.


9. Rapid installation 

Being light in weight, handling & installation become very easy. One worker can do 20 sqm every day.


10. Dry working 

It is very convenient, less building rubbish left after installation and clean up easily.


11. Excellent surface finish 

The wallboard surface is level. You can plaster directly for inner decoration. It also can take all decorative treatment.


Product application


EPS lightweight composite cement sandwich panel can be used in interior wall,exterior wall,roof and floor.



hospital 13_副本_wps图片


Hb34523d5b9164d7e8f8cab04d9b70cff7_350x350.jpg


H3843ec2255d6482b8f3e439c4dbd493am_350x350.jpg


外墙应用2


1

Install process


Alignment:making the base line of the installation position of the wallboard.

       ↓

Sawing of wallboard:cutting and adjusting the width and length of wallboard on the basis of the requirement.

       ↓

Sizing: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.

       ↓

Fitting the sheet: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.

       ↓

Placing the wallboard: filling the vacant position of the wall 

       ↓

Adjustment: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.

       ↓ 

Filling joints: clear away the facial panel  cement mortar and press it tightly with round steel bar.

       ↓

Installation of crack-resistant material: after about one week, taking out the wooden wedges and paste the anti-crack tape with cement mortar.

       ↓

Insertion of wires: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.

       ↓

Plastering paint: to finish the wal, tiles can be paste without any scraping and wallpaper also can be applied directly.


dfv


Packing and shipping 


  1. Free packing (with normal pallet and packing belt)

 2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 

 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container.


11

3


 11 (2)


About us


Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. 


1


工厂2


Certificate


1


资格证书3


Contact us


Xiamen Zhongjingtai Building Materials Co., Ltd 

Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China

Contact person:Jodie Huang  

TEL: +86-592-5216902    FAX: +86-592-5216319    

Mobile/Whatsapp/Wechat: +86-13695041249 

Email: sales07@zhongjingtai.com   Website: www.zhongjingtai.com  

Inquiry