Eps Composite Interior Sandwich Wall Panel

eps composite interior exterior sandwich wall panel 1. ZJT Sandwich Panel Composition Face: Calcium Silicate Board Core: Cement+EPS Polystyrene Foam+Sand 2. ZJT Sandwich Panel Feature a.Light weight Its density is only 750-800kg/m3, and the weight of 75mm thick wall panel is 60kg/m2, which is...
Chat Now

Product Details

eps composite interior exterior sandwich wall panel


1. ZJT Sandwich Panel Composition

Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand


Parameter Index Specifications

1Anti-impact capacity/times≥5≥5≥5

2Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0

3Compressive strength/Mpa≥3.5≥3.5≥3.5

4Softening coefficient≥0.8≥0.8≥0.8

5Surface density(kg/m2)≤70≤70≤90

6Moisture rate(%)≤10≤10≤10

7Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5

8Hang force(N)≥1000≥1000≥1000

9Sound insulation capacity in the air(dB)≥35≥35≥40

10Fire endurance(h)≥1.5≥1.5≥2.5

11Heat transfer coefficient(w/m2.k)≤2.0≤2.0≤2.0

12Inner radiation index≤1 ≤1 ≤1 

13Outer radiation index≤1 ≤1 ≤1 

14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change
15The combustion properties(A1 or A2)__A1 or A2

2. ZJT Sandwich Panel Feature

a.Light weight
     Its density is only 750-800kg/m3, and the weight of 75mm thick wall panel is 60kg/m2, which is only 1/6 of that of brick walls, 1/2 of that of aerated concrete, and 1/7 of that of 120mm thick masonry wall with plastering on both sides.
    The hanging strength of single spot is 100kg, can nail and affix tile,
c.Sound insulation
     The sound insulation capacity in the air is 35-45db( According to National standard: GBJ121-88),
d.Easy to install
    save mush cost than traditional brick construction
e.Energy saving, Environmental friendly
     The raw material do not include harmful substance.
    70+ years building life span
g.Easy to be processed
    It is available for drywall partition system, saving your time and labor.Traditional sticking is suitable for it. Besides, these boards can be worked with lacquering, glue, bonding, punching, cutting, screwing, contour, cutting, routing.
h.Low density
i. Fire-resistance
It can endure fire at 1000 degrees for over 4 hours, without producing any toxic gas. 
j.Fungus resistant, moisture-proof


3. ZJT Sandwich Panel Specifications


4. ZJT Sandwich Panel Advantages

featuresmore detail
1green100% free of harmful substances and are of A non-radioactive products, standard GB6566-2001.
2lightweight economicThe volume-weight only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry.
3increase valid spacethe thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. in other words, it can increase 6/m2 per 100/m2 .
4moistureproof waterproofwill keep dry and leave no stains. During humid days, the boards will not condense water either. suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof.
5fireproofFireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard.
6heat insulationZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level.
7sound insulationThe raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB.
8walls can be nailed and groovedZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on.
9good integrationBy using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry.
10easy and fast constructionIt can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering.

5. ZJT Sandwich Panel Applications

a.Interior Partition(Thickness: 60mm, 75mm, 90mm, 100mm, 120mm)


b.Exterior Wall (Thickness: 120mm, 150mm)


c.Modern high-rise building
     The indoor space of ecological residences and all kinds of houses and structures, etc.
 Xiamen-Zhongjingtai-Building-Materials-Co-Ltd- (66)

6. ZJT Sandwich Panel Packing

Packaging Details:1. Free packing (with normal pallet and packing belt) 2. Standard exporting packing (wrapped with plastic thin film, wedge protect and good pallet)
Delivery Detail:10-15 days

7. Package 
 1.Hold by Wooden Pallet
 2.Covered by PVC and Bonded with plastic belt 
 3.Fasten around the corners
 4.Mounted in container to protect your purchasing.

8. Loading

Items(mm)Single(piece)Load by 20'GPLoad by 40'GP


Lana Chen
Xiamen Zhongjingtai Building Materials Co.,Ltd 
Unit 2A, Lianchang Building, No 6-8Huli District,Xiamen, China. 


Hot Tags: eps composite interior sandwich wall panel, suppliers, manufacturers, factory, price


You Might Also Like