Advanatges of ZJT Eps cement sandwich panel
ZJT Lightweight Composite Energy-saving Wall Panel is composed of face panel and interior filling.The material of face panel is thin fiber cement board or calcium silicate board,and the middle is filled with lightweight composite core materials,including cement,EPS and fly ash..
1. FAST INSTALLATION AND FIRE PROOF
Our pre-cast wall panels feature a tongue and groove
design that reduces installation times, increases labor
efficiency and saves on costs. Electrical and plumbing
installations can be completed 5 - 10 times faster when
compared to using traditional hollow blocks.
FAHSTWALL panels were also tested to withstand up to
1,000°C for 120 minutes and compliant to the standard for Grade A Fireproof Materia
2. ACOUSTICALLY EFFECTIV
A 42dB sound insulation test result complies with the
National Insulation Test Standard GBJ121-88.
Minimal sound transmission and noise reduction are
accomplished due to the higher density and unique
composition of the wall panel material. This results in a
more comfortable and quiet environment without the need
to use any additional insulation products thereby saving on costs
3. Highly Seismic Resilient
The tongue and groove design of our wall panels are
attached and secured using a firm sealant and adhesive.
This transforms multiple wall panels into one sturdy wall
with impact resistance and bending qualities that are better
than traditional brick walls secured with ordinary cement.
4. STRUCTURALLY SAFE AND ECONOMICAl
The lightweight materials used in our panels are 1/6th the
weight of normal 120mm thick brick walls and 60% lighter
than traditional hollow blocks. This minimizes the load on
the beams and columns which equates to significant cost
reduction on the structural frame of the building.
Our panels are also moisture proof, water resistant and
ready for painting as soon as they are installed and joined
using our firm sealant and adhesive
5. .THERMALLY EFFICIENT AND GREEN
The ZJT WALL system is much more thermally efficient
in heat absorption and dissipation due to its density and
the materials used. This results in a cooler interior
environment and cost savings from reduced air
conditioning usage.
Our wall panels comply with the Standard of Radiation
Hygiene and Protection of Building Material (GB6566-86)
making them environmentally friendly and safe.
installation
Application
(1)floor system/roof system/interior &exterior wall system/villa system
supplied to:Russia ,Kazakhatan,Southeast Asia, Australia, South Africa, North Europe etc
Technical Index
ZJT EPS concrete panels combines the construction ease of concrete with thermal and hydro insulation properties of EPS and can be used for a various range of application where lighther loads or thermal insulation or both are desired.
The EPS panel is composed of a 5mm calcium silicate board facing with a core of concrete and EPS (Expanded polystrene).
Some other advantages of building system using our panel
Durable- Fire resistant, the panel can resist fire for about 4 hours under 1000ºC
Energy Efficient-Greatly reduced cooling/heating costs
Easily constructied-lightweight buillding materials means reduced foundation depth and reinforcement as well as labour hours cost.
Pest/termite/rodent resistant-Resistant to rot and moudle
Local manufacturing, mass produced to exacting tolerances
Aesthetically pleasing-very flexible design, it can be used for anything from simple to complex structures
contact information
contact person:Lana Chen
Whatsapp/mobile: +8613559098509
Tel: 86-592-5216902
Fax:86-592-5216317
Xiamen ZhongJingtai Building Materials Co.,Ltd
Address:Unit 2A, Lianchang Building, No.6-8 Huli Avenue, Huli District, Xiamen, China