Core Solid Fireproof EPS Fiber Cement Board Sandwich Panel
ZJT Light Composite Energy-saving Sandwich Wall Panel is composed of face panel and interior filling. The quality and technology of product have reached to a new level and become the leading brand among the similar products.
The product has solid,lightweight,thin,better strength,impact resistance,hanging strength,heat insulation,sound insulation,fireproof,waterproof,easy cutting,pet and rot resistant,increasing usable space. It can be arbitrary slot,without batch file,dry operation,enviroment protection,which achieve energy conservation and energy efficiency. At the same time,this reduces the total area to be occupied by the wall and to raise residential practical area,alleviates the structure load,improves the building aseismatic capacity and safety performance,and reduce total cost. This production technology and application is the reform of our country wall material,is a new breakthrough.
Surface : fiber cement board
Interior filling materials: EPS / cement / fly ash / sand / additive
1. Energy saving, Green, Environmental friendly
The raw materials do not include harmful substances.
Energy-saving effects of the building is greatly improved It is highly recommended by the government.
70+ years building life span.
Hard surface and no damage after impacting. The hanging strength of single spot is 100kg, can nail and affix tile.
Panels have a fire rating of 4 hours. Grade A of National standard.
5. Waterproof, Dampproof
No bead on wall panel surface in wet climate.
6. Sound insulation
The sound insulation capacity in the air is 35db-45db (according to National standard: GBJ121-88).
More suitable for seismic & cyclone prone zones.
8. Unique tongue and groove
Specially designed tongue and groove arrangement ensures a perfect joint and makes construction faster.
9. Rapid installation
Being light in weight, handling & installation become very easy. One worker can do 20 sqm every day.
10. Dry working
It is very convenient, less building rubbish left after installation and clean up easily.
11. Excellent surface finish
The wallboard surface is level. You can plaster directly for inner decoration.It also can take all decorative treatment.
residential building,school,hospital,prefab house,office,
hotel,public construction,entertainment place.
wall/exterior wall/interior wall/super high wall/abnormity wall,
roof,floor,pipe,fire well,equipment partiton
|2||Anti-bending Damage Load |
[times over deadweight]
|3||Compressive Stregth [Mpa]||≥3.5||≥3.5||≥3.5||≥3.5||≥3.5|
|5||Surface Density [kg/]||≤70||≤70||≤90||≤110||≤110|
|6||Moisture Rate [%]||≤10||≤10||≤10||≤8||≤8|
|7||Drying Shrinkage Value [mm/m]||≤0.5||≤0.5||≤0.5||≤0.5||≤0.5|
|8||Hang Force [N]||≥1000||≥1000||≥1000||≥1000||≥1000|
|9||Sound Insulation Capacity In the Air[dB]||≥35||≥35||≥40||≥45||≥50|
|10||Fire Endurance [H]||≥1.5||≥1.5||≥2.5||≥3.0||≥4.5|
|11||Heat Transfer Coefficient [W/m2.k]||≤2.0||≤2.0||≤2.0||≤2.0||≤2.0|
|12||Inner Radiation Index||≤1||≤1||≤1||≤1||≤1|
|13||Outer Radiation Index||≤1||≤1||≤1||≤1||≤1|
|Items(mm)||Single(piece)||Load by 20'GP||Load by 40'GP|
How to install
Set line:set line and carry panel in position.
Saw panel:use hand-hold eletrict saw to cut freely.
Sizing:sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
Installation:carry panel prepared to be installed panel.
Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
Corret and fix:use one guiding ruler to check and level correction.
Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
Plant bar in floor:dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
Plant bar between wall panel:plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
Install electric wire and switch:set lines on the place required to be settled with concealed wire and switch box.
Grout and fill slurry:fill and handle corrected wall panel with ploymer mortar.
Scrapping ash and sticking anti-crack cloth,coating:stick anti-crack cloth and brush coating after grouting slurry.
1,Q:How about your packing?
Free packing: we use normal pallet and packing belt for panels.
Standard exporting packing:good pallet,pearl wool,corner protective paper,packing belt,plastic thin film.
Packing size: 2270*610*(60-200)mm
2,Q:How about your loading?
A:Our loading is normally 18 pallets per 20' container or according to clients' requirements.
3,Q:What is your MOQ?
A:A 20 feet container.
4,Q:How about your time of delivery?
A:It's about 15 days after receiving deposit.
5,Q:How can we get samples.
A:Our samples are free for your reference,you just need to pay for the freight.
6,Q:How about the payment terms?
A:30% T/T in advance T/T balance before delivery.
contact person:Lana Chen