ZJT Concrete Lightweight Wall Panel for Hotel is a kind of lightweight energy saving compound board material taking calcium silicon board(no-asbestos) as surface panel, with cement, EPS, fly ash as fillers and forming by one time compound. The product can replace construction materials as red brick, clay solid brick, air brick, color-coated steel sandwich board, gypsum block, wire spatial grid structure perlite board, perlite porous board etc.
It can widely be applied to wall materials of various high and low buildings such as: bank, office building, hospital, school, hotel, mall, amusement hall, active barrack, old house reconstruction, residence and workshop.
1. The columns are inside the sandwich panel which makes it more beautiful and reality.
2. Compared with the earth building, the price is much lower and the installation time is much shorter.
3. Fire rate partition: 4 hours, reach to A level
4. Sound insulation: 38-46db
5. Thermal Conductivity: 0.221w/mk
6. Anti-earthquake: depend on the strength of steel structure (8 grade)
7. The using life is around 40-70 years.Environmental protection and economy.
8. Each worker can assemble 30~40 square meters every day, easy and fast installation.
9. Loading: 250-650square meters can be loaded in one 40 feet shipping container, it will depends on the size you need.
ZJT Lightweight Wall Panels have 2270/2440mm(Length)*610mm(Width)*60/75/90/100/120/150(Thickness) sizes for optional,
Usually, we suggest to use 60~75mm thick for simple partition, 90~100mm thick for inner wall partition,
120~150mm thick for outer wall partition.
Fire proof limit
Sound Insulation Capacity
Hanging nail force
Lightweight Wall Panels Production Line is made of mixer equipment, expander equipment, mold equipment and other machinery set. The capability is mainly decided on the quantity of mold car. The advantage of the production line is high output, low input, stable quality and high efficiency.
Usage: mixing EPS polystyrene foam particles, cement, sand, calcium silicate board, additives and other raw materials at a proper ratio.
Feature: every parts are designed simple and practical to keep cost efficient. High output, only needs five minutes to finish mixing one cubic meter raw material. Easy operation, very easy to operate.
Relative equipment: cement screw pumping system, weighting hopper for cement and sand, foam hopper, outer hopper, water pump and other accessories.