Clean room panel strong wall panel outdoor panneau sandwich
Product Introduce
Composite wallboard uses ordinary calcium silicate cement, sand and fly ash or other industrial waste such as water slag, slag, etc. as fine aggregate, then add polystyrene granules and a small amount of inorganic chemical additives, with automatic high efficiency force The special agitation system for light aggregates introduces air into the honeycomb layer to stabilize the pores during the mixing process to further reduce the weight of the product, which not only reduces the material cost, but also achieves the ideal insulation and sound insulation effect.
Face panel:5mm calcium silicate board
Core material:EPS,cement,fly ash,additives
Product feature
1. Fireproof, waterproof and green environmental protection The Zhongjingtai energy-saving sheet material is mainly a mixture of polystyrene granules, cement and fly ash. The fire resistance limit at 1000 °C is 3 hours, and the non-combustibility is up to the national A-pole specification. No toxic gas is emitted, it is fully compatible with the world's environmental protection regulations; it can be made into water without any ashing during use, without any leakage.
2, good sound insulation The internal composition of the lightweight composite wallboard series (EPS polystyrene particles) has excellent sound insulation and sound absorption. For example, the sound insulation of Zhongjingtai 100mm thick plate is greater than 42dB, the national specification is 35dB, and the traditional block sound insulation is 40dB.
3, the excellent characteristics of the construction process is now mainly in the current construction time can be the maximum limit of the construction personnel to facilitate the suspension of the obligation, and can increase the construction power, and then can delay the completion of the construction period. Very good is that no sand and cement are needed in the construction process. The volumetric contrast of the lightweight composite wallboard is small, and the accumulated time can make the comparison of the other party simple and efficient. And also think about the elements of the construction site, try to minimize the space occupied during construction. There is no episode of construction waste. During the construction period, the construction personnel do not need to stop the traditional plastering of the lightweight composite wallboard. This will increase the use of personnel to a certain extent. Added the cost of construction.
4, energy-saving goods are mainly used to produce raw materials without soil, the most energy-saving characteristics of goods can be expressed in the three aspects of heat insulation, insulation and sound insulation, which is made of composite of anti-freeze, thermal insulation and environmental protection materials - polystyrene foam Under certain circumstances, it has excellent heat insulation and heat preservation characteristics. Let the text of the whole room be at a certain level, and then it is excellent to reach the role of energy saving.
5. Lightweight The lightweight composite wallboard series is the lightest high-tech new material in the real wall material. Compared with other wall data components, the ratio is 1:5 or more, which can greatly increase the main body load and save the cost.
6. High strength The lightweight composite wallboard series has good impact resistance and has been tested by the national professional inspection organization. The bending damage load is more than 3 times the weight of the load.
Product Application
Interior wall & exterior wall
Floor & Roof
Others specific application
Product Specifacation
| Eps lightweight composed wall panel | Length×Width (mm) | Thickness option (mm) |
| Regular size (mm) | 2270×610mm | 60/75/90/100/120/150 |
| 2440×610mm | ||
| Thickness suggest (mm) | Roof | 60mm |
| Interior wall | 75/90/100mm | |
| Exterior wall and Floor | 120mm/150mm |
Product certificate
Our certificate is SGS and TUV
If you want to look at the specific test report,please contact me,i will send you for reference.
About us
XIAMEN ZHONGJINGTAI BUILDING MATERIALS CO., LTD. is a professional high-tech research and development company producing new wall materials,
machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city,
with the convenience of water and land transportation and only ten minutes from the airport.
We adhere to the "quality first, win-win cooperation" business philosophy and provide our value customers with strong technical support and package services.
With our top quality products and credibility, we pledge to collaborate with our partners to thrive together while meeting the demands of the market.
We are committed to contribute these superior and environmentally-friendly wall materials to the society.
Contact us
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang
TEL: +86-592-5216902 FAX: +86-592-5216319
Mobile/Whatsapp/Wechat: +86-13695041249
Email: sales07@zhongjingtai.com Website: www.zhongjingtai.com
Tip:If you want to test our product,we can send you the free sample.