Precasting Lightweight Wall 200mm
EPS & Cement Sandwich Panel is a kind of light weight energy saving composite wall panel which takes calcium boardas face panel, with cement and EPS polystyrene grain as core and moulding by one time.They are widely used as interiorwall, exterior wall, floor, roof, etc.
The EPS-Panel is composed of a 5mm fiber cement board facing with a core of concrete and EPS (expanded polystyrene). options of Thickness : 20mm to 200mm, Width : 610mm, Lenth : 2270mm & 2440mm, Tongue and groove profiles to interlock each panel. Can be manufactured with conduits.
How to install
Set line: set line and carry panel in position.
Saw panel: use hand-hold eletrict saw to cut freely.
Sizing: sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
Installation: carry panel prepared to be installed panel.
Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
Corret and fix: use one guiding ruler to check and level correction.
Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
Plant bar in floor: dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
Plant bar between wall panel: plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
Install electric wire and switch: set lines on the place required to be settled with concealed wire and switch box.
Grout and fill slurry: fill and handle corrected wall panel with ploymer mortar.
Scrapping ash and sticking anti-crack cloth, coating:stick anti-crack cloth and brush coating after grouting slurry.
Application: Exterior & Interior wall system, Roof system, Floor system
Export sale: Zoe Zeng
Xiamen ZhongJingTai Building Materials Co,. Ltd